ACER TRAVELMATE 3210 WIRELESS LAN TREIBER HERUNTERLADEN
Acer TravelMate 3210 Wireless LAN Driver
Acer TravelMate Driver DownloadChipset driver, BIOS driver, On this laptop as already paired DVDRW, LAN, WLAN, hours Battery. Acer TravelMate & TravelMate Z Driver Download For Windows XP Wireless LAN, Ambit, Wireless LAN Driver, , MB, /12/ Download drivers for Wi-Fi device for Acer TravelMate laptop for Windows 7, XP, 10, 8, and , or download DriverPack Solution software for driver update.
|File Size:||18.3 MB|
|Supported systems:||Windows 2K, Windows XP, Windows Vista, Windows Vista 64 bit, Windows 7, Windows 7 64 bit, Windows 8, Windows 8 64 bit, Windows 10|
|Price:||Free* (*Free Registration Required)|
Acer TravelMate 3210 Wireless LAN Driver
With the exception of the smartcard reader, for which there does not appear to be a Linux driver, and the usual set of internet and multimedia hotkeys that i do not need either, everything worked fine almost out of the box. Acer TravelMate 3210 Wireless LAN SuSE9. This script only provides a x modeline, so the display was a bit fuzzy at first, but a search through similar models on the linux-on-laptops site quickly turned up a working Modeline entry for x, namely ModeLine "x" Networking and wireless hardware were correctly recognized during installation and work well.
I Acer TravelMate 3210 Wireless LAN did a quick test of the Bluetooth functionality with an external Acer bluetooth modem. Both WLAN and Bluetooth can be switched on or off with two illuminated keys on the front of the laptop, which do not require OS support to function. ACPI battery readout and cpu frequency switching worked out of the box. Press F2 in the test items.
Make sure that the DIMM is fully installed into the connector. A loose connection can cause an error.
Remove the battery pack. Connect the power adapter and check that power is supplied.
Laptop Driver: Acer Travelmate Drivers
Disconnect the power adapter and install the charged battery pack; then check Acer TravelMate 3210 Wireless LAN power is supplied by the battery pack. Check the Battery Pack on page 60 If you suspect a power problem, see the appropriate power supply check in the following list: Chapter 4 59 Check the Battery Pack To check the battery pack, do the following: From Software: Repeat the steps 1 and 2, for both battery and adapter. This helps you identify first the problem is on recharging or discharging. Power off the computer.
See the following figure If the voltage is still less than 7. From Hardware: If the battery status indicator does not light up, remove Acer TravelMate 3210 Wireless LAN battery pack and let it return to room temperature. Re-install the battery pack. If the charge indicator still does not light up, replace the battery pack.
Acer TravelMate 3210 Driver Download
Touchpad check If the touchpad doesnt work, do the following actions one at a time to correct the problem. For example, run Syn touch driver. If yes, then replace switch board. If no, then go to next step. Replace touch pad PCB. After you use the touchpad, the pointer drifts on the screen for Acer TravelMate 3210 Wireless LAN short time. This self-acting pointer movement can occur when a slight, steady pressure is applied to the touchpad pointer. This symptom is not a hardware problem. No service actions are necessary if the pointer movement stops in a short period of time.
The most likely cause is listed first. Do not replace a non-defective FRU.
This index can also help you determine the next possible FRU to be replaced when servicing a computer. If the symptom is not listed, see Undetermined Problems Acer TravelMate 3210 Wireless LAN page The following lists the error messages that the BIOS displays on the screen and the error symptoms classified by function.
Most of the error messages occur during POST. Some of them display information about a hardware device, e. Others may indicate a problem with a device, such as the way it has been configured. If the system fails after you make changes Acer TravelMate 3210 Wireless LAN the BIOS Setup Utility menus, reset the computer, enter Setup and install Setup defaults or correct the error. RAM refresh circuit does not function properly. DMA controller does not work properly. The interrupt controller does not work properly.
Keyboard controller failed to respond with the self-test command. No video device found. No RAM installed. Keyboard controller failed during system inquiry about connected devices. The keyboard fails to respond or no keyboard is connected.